Blog

Como Flashear Motorola XT

• Tener instalados los drivers motorola 
• Cable USB 
• Volumen menos - insertar cable o power on
• mfastboot.exe y archivos adb files juntos en tu computadora es MFastboot el fastboot normal no funciona

revisar este archivo que viene dentro del firmware o flash 

vamos a convertir estos parametros en un archivo listo para flashear cualquier Motorola

<?xml version="1.0" ?>

<flashing>

 <header>

   <phone_model model="surnia_lra"/>

   <software_version version="surnia_lra-user 5.1 LPI23.29-23 33 release-keysM8916_2020604.09.03.21.10R"/>

   <subsidy_lock_config MD5="00b1a7c46832ca619f9090d3fc80ecce" name="slcf_rev_b_default_v1.0.nvm"/>

   <sparsing enabled="true" max-sparse-size="268435456"/>

   <interfaces>

     <interface name="AP"/>

   </interfaces>

 </header>

 <steps interface="AP">

   <step operation="getvar" var="max-sparse-size"/>

   <step operation="oem" var="fb_mode_set"/>

   <step MD5="8977094e6633500a3db3d4ef71d8639b" filename="gpt.bin" operation="flash" partition="partition"/>

   <step MD5="c3f07afe7cd06ffeadffc8d098748e8e" filename="bootloader.img" operation="flash" partition="bootloader"/>

   <step MD5="af89b4f5f32b6a16e6b8611e5b7051e0" filename="logo.bin" operation="flash" partition="logo"/>

   <step MD5="376dbd65a8e59f804b6a534c6c6ca937" filename="boot.img" operation="flash" partition="boot"/>

   <step MD5="f191d273b9e340bc961b83c4b9841dc7" filename="recovery.img" operation="flash" partition="recovery"/>

   <step MD5="a58212b860f0aef856278c523c175d60" filename="system.img_sparsechunk.0" operation="flash" partition="system"/>

   <step MD5="55b8aa132d2166355eb12ee925b22fb0" filename="system.img_sparsechunk.1" operation="flash" partition="system"/>

   <step MD5="279a20e3f8aae29817e6ed99f62bd446" filename="system.img_sparsechunk.2" operation="flash" partition="system"/>

   <step MD5="320da2f8ccd308c3333025fe161ffff9" filename="system.img_sparsechunk.3" operation="flash" partition="system"/>

   <step MD5="f2ef0c98b99828612b87fd564f2a2cdd" filename="system.img_sparsechunk.4" operation="flash" partition="system"/>

   <step MD5="e45d1b47fa90354f5a343a4b30353681" filename="system.img_sparsechunk.5" operation="flash" partition="system"/>

   <step MD5="ae978e15a3e18dde72f7f7570bd7259b" filename="NON-HLOS.bin" operation="flash" partition="modem"/>

   <step operation="erase" partition="modemst1"/>

   <step operation="erase" partition="modemst2"/>

   <step MD5="f7338299fb59a5fb5840f5c8658a2265" filename="fsg.mbn" operation="flash" partition="fsg"/>

   <step operation="erase" partition="carrier"/>

   <step operation="erase" partition="cache"/>

   <step operation="erase" partition="userdata"/>

   <step operation="oem" var="fb_mode_clear"/>

 </steps>

</flashing>

Windows + R 

Notepad.exe

Ingresar al archivo todo las configuraciones

empieza aqui

mfastboot getvar max-sparse-size

mfastboot oem fb_mode_set

mfastboot flash partition gpt.bin

mfastboot flash bootloader bootloader.img

mfastboot flash motoboot motoboot.img

mfastboot flash logo logo.bin

mfastboot flash boot boot.img

mfastboot flash recovery recovery.img

mfastboot.exe flash system system.img_sparsechunk.0

mfastboot.exe flash system system.img_sparsechunk.1

mfastboot.exe flash system system.img_sparsechunk.2

mfastboot.exe flash system system.img_sparsechunk.3

mfastboot.exe flash system system.img_sparsechunk.4

mfastboot.exe flash system system.img_sparsechunk.5

mfastboot flash modem NON-HLOS.bin

mfastboot erase modemst1

mfastboot erase modemst2

mfastboot flash fsg fsg.mbn

mfastboot erase carrier

mfastboot erase cache

mfastboot erase userdata

mfastboot oem fb_mode_clear

mfastboot reboot

Archivo -> Guardar Como -> Guardar como tipo -> Todos los archivos

Nombre del Archivo -> Flash.bat

Despues solo dar doble click al archivo y listo esperar a que termine la instalacion del nuevo software

Lanix X860 flash phone write firmware freeze logo start up

Me llego este Lanix X860 se quedaba atorado en el logo 

Lanix X860 Mexico Telcel Movistar at&t 

https://www.needrom.com/download/lanix-x860/

baja este ROM LANIX X860 - Update SW_03

Open PAC File

Firmware Settings y dejar seleccionadas solo las casillas que tienen palomitas todas las demas desmarquelas 

Despues presionar FLASH PHONE en segundos queda prendido y jalando al 100 %

ACTION: Flash Firmware.

Selected firmware: X860_OPEN_SW_03.pac

NV: Default Mode (protect calibration)

Device Storage: EMMC

Start Detect phone...

Unlock.mx ... Done 

Phone must be off with battery inside.

Long press "VOL -" key and insert usb cable.

For some phones need to

Long press "VOL -"+ "VOL +" key and insert usb cable.

Detected: SPRD U2S Diag (COM38)

[00:00:00] Sending loader.

BOOT: SPRD3

Sending loader, keep boot key untill loader start.

[00:00:05] Loader ok

[00:00:05] Wait for loader....

Loader OK: ~"Spreadtrum Boot Block version 1.1

Changing bautrate OK.

[00:00:06] [1]First boot done.

[00:00:06] Sending second loader.

[00:00:13] Second loader sent ok.

New flash protocol detected.

[00:00:13] Reading: system

Error while read flash(1).

[00:00:34] Reading: super

System name: super

Phone and firmware have same android

[00:00:34] Reading: miscdata

[00:00:34] Reading: w_fixnv1_a

NVRAM saved to: C:\Users\Montreal\Documents\spreadtrum_module\flashmode_nvram_backup\_352171890429486\_352171890429486_nvram_backup.tar

Phone have super partition.

[00:00:46] Making flash ic repartition.

NV_COMM disabled by user, skip

[uboot_a]Format disabled, skip.

[uboot_log]Format disabled, skip.

[00:00:46] Start write: cache

[00:00:46] Start write: userdata

[w_runtimenv1]Format disabled, skip.

[misc]Format disabled, skip.

[sysdumpdb]Format disabled, skip.

[00:01:02] Start write: persist

[00:01:04] Format: metadata

[00:01:04] [metadata]Format OK.

Flashing done.

[can take 0-10 sec]Wait untill phone restart.

Exe version: NckBox Spreadtrum Module 2.1.8_bugfix

Log saved:

C:\Users\Montreal\Documents\spreadtrum_module\Saved_Logs\_writepac__1.txt

Total Time: 00:01:15

Done.

UNLOCK.MX & MULTI-UNLOCK.COM